
Heatcatcher completes first industrial heat pump system for Wienerberger concrete tile factory at Sandtoft


February 2024: The Wienerberger Group is a building solutions provider and is the world’s largest producer of bricks, paving blocks and roof tiles with 14 plants for such products in the UK. The Sandtoft site produces concrete roof tiles, manufacturing around 2.8 million m²/ year.
The production process involves extruding of the concrete mix into precisely shaped moulds and then curing to ensure strength and durability. Sandtoft site has no Natural Gas connection, so the heat needed to carry out the curing process has relied on fuel oil firing in boilers to heat circulated hot water. As part of Wienerberger’s commitment to decarbonise their operations - Sandtoft air source heat pumps project seeks to switch fuel from oil to Green Electricity in part of the site known as Factory 1.
Air Source Heat pumps are a known technology taking energy from ambient air and using electricity to provide hot water in a much more energy efficient way than simple electrical heating and this efficiency and optimising of control can help mitigate the significantly higher energy cost of electricity vs natural gas or fuel oil.
“Our collaboration with Heatcatcher Ltd allowed us to ensure our basic understanding of the technology did not present a risk in eventual delivery of the solution.
We see Heatcatcher as a competent partner for study and calculation of energy supply and demand from the ambient air across seasons to the thermal load of the curing process.
The collaboration therefore allowed our strengths in production processes, materials, measuring and monitoring to be supported with their knowledge of thermal process.
Execution on site was managed locally with support of contractors for building, piping and electrical work” Keith Jackson , Head of Thermal Process and Projects
“The five curing chambers were heated by 2 x 120 kW Gas Oil Boilers hot water system supplying hot water at a maximum of 80 ºC. The existing hot water system and controls were modified for the hot water supply to be alternatively supplied by a system of 2 x 62 kW Air Source Heat Pumps and 2 x Thermal Bufffer tanks. The system design is first of its kind in the UK for curing concrete tiles. Working with the Wienerberger team at Sandtoft made the design and delivery of the project a real success and we are delighted with the significant gas oil and carbon emissions savings achieved for the operation of the plant”
Darren Bryant, Heatcatcher CEO
“This project has demonstrated the benefit of installing heat pumps in factories curing concrete in order to reduce their CO2 emissions and support decarbonisation. This represents a significant step to achieving the ambitious CO2 reduction targets Wienerberger has set itself across its building solutions business”
Nikki McDonald, Wienerberger Sandtoft Plant Manager
This case study is issued by Heatcatcher Ltd. For more information, please contact Darren Bryant at darren.bryant@heatcatcher.com or 01273 358520.
Heatcatcher - Waste Heat Recovery
© 2035 by Name of Site. Created on Wix Studio.